Mingwei LI
,
Jingchuan ZHU
,
Zhongda YIN
,
Gang ZENG
材料科学技术（英）
This paper presents a new method to determine the equivalent oxygen diffusivities of particle dispersed composites. This method can be used to design FGM thermal barrier systems with the function of oxygen barrier. A qualitative explanation of the oxidation of nickel with the increment of zirconia contents in the composite samples can be accepted by this method. The values of equivalent oxygen diffusivities obtained with this method are in excellent agreement with those from the EMT method for the composites with ZrO2 particle dispersed phase when the volume fractions of dispersed phase are lower than 25%.
关键词:
Equivalent oxygen diffusivity
,
null
,
null
Yong LIU
,
Jingchuan ZHU
,
Zhongda YIN
,
Mingwei LI
材料科学技术（英）
The effect of triple annealing on stress relaxation of Ti-6Al-4V alloy as well as the microstructure after stress relaxation were studied. The results showed that triple annealing treatment enhanced the resistance of stress relaxation performance, and when the temperature was rising, this effect became notable. The stress relaxation deformation mechanism is of dislocation creep at 400℃ and recovery creep at 600℃.
关键词:
Triple annealing
,
null
,
null
Mingwei LI
,
Jingchuan ZHU
,
Zhongda YIN
,
Xiaoqiang LI
,
Zuyan LIU
,
Jae-Ho Jeon
材料科学技术（英）
The microstructure evolution of mechanical alloyed Mo-66.7%Si powder using the high-energy ball mill has been studied by X-ray diffraction and scanning electron microscopy. The results showed that MoSi2 can be synthesized by MA of Mo-66.7%Si powder mixtures. Cold welding behavior between Mo and Si powders plays an important role in the preparation of MoSi2 by the MA.
关键词:
Haitao FANG
,
Jingchuan ZHU
,
Zhongda YIN
,
Jae-Ho Jeon
,
Yoo-Dong Hahn
材料科学技术（英）
A coating of composition Si-40Mo (wt pct) was prepared by fused slurry coating method on the two-dimensional carbon/carbon (2D-C/C) composite to improve oxidation resistance. In the procedure of the fabrication, pure St slurry inner layer in the pre-coating was necessary to apply because of infiltration of liquid Si into the substrate during the sintering. The coating consists of Si continuous phase and MoSi2 particles. In addition, the infiltration of Si into the substrate and the SiC reaction layer between the coating and the C/C composite were observed. Oxidation resistance and the thermal shock resistance of the Si-Mo fused sluury coating were quite excellent at 1730℃
关键词:
